Toll-Free: +1-844-499-6700 [email protected]

Do you see a warning message stating QuickBooks requires that you reboot loop when installing an update for QuickBooks? Well, in some cases, the update might not be finished and the message QuickBooks requires that you reboot your computer to complete the installation keeps showing on a loop even after the system has rebooted. As this error isn’t pretty much common, tackling through it can be a bit daunting for QuickBooks users. When you are trying to install the latest update, you might end up in the same error message like a broken record. It is like being stuck in a loop, where you keep doing the same thing over and over again, but nothing works or changes. This repetitive cycle is not just annoying but also prevents you from getting QuickBooks up and running. 

QuickBooks Requires That You Reboot Loop

However, to help you in dealing with this particular glitch, here we are with this segment sharing the essential information regarding the error, along with the possible ways that can be implemented to get rid of it from its root cause. However, if you are seeking any sort of technical guidance, then feel free to reach out to our technical support team at  +1-844-499-6700, and let them help you with your queries related to QuickBooks immediately. 

Also Read: How to Fix QuickBooks Error 3371 Status Code 11118 (Couldn’t Load the License Data)?

What is QuickBooks requires that you reboot loop error? 

To understand QuickBooks requires that you reboot loop error or QuickBooks 2022 installer keeps forcing reboot or won’t install, here is the scenario in which you might experience this error. 

  • Initially, you might run the installation after downloading it from QuickBooks and run it as admin. 
  • After that, you will start installing the VC9 vc_redist x86/x64 without issue.
  • This is when you might see an error message appearing almost instantly when the request to reboot the system appears. 
  • You will then press the Yes tab. However, it will show the same error message on the window. Following the error, the system will then reboot as usual. 
  • The installer will now start on its own and the process then repeats again and again. 
  • If you try to go for No when the prompt shows up on the screen to reboot, then the system will show that the installation was suddenly interrupted and hence you will have to begin from the initial step. 

Factors causing QuickBooks requires reboot to complete installation error 

A few factors can drag you into QuickBooks update reboot loop error. These factors include: 

  • In case of a corrupted or damaged hard disk, you can experience this issue. 
  • Or if the QBWUSER.ini file is either missing or damaged. 
  • Be ready for such an error if you select a lengthy company file name. 
  • Another probable reason can be an improper installation of QuickBooks. 
  • Or if you are using an outdated operating system. 

Important tips to consider

Before you begin with the steps to fix QuickBooks requires that you reboot loop error, it is important to keep a few things in mind. 

  • If you haven’t already, then make sure to update QuickBooks to the latest release
  • Also, ensure to suppress the QuickBooks software. 
  • Turn off the hosting on the particular system. 
  • Also, change the name of the .ND and .TLG files, in case they are too long. 
  • Another essential point is to fix QuickBooks software, in case there are any issues with it already. 

Quick Steps to Fix Quickbooks 2023 requires that you reboot loop

Try performing these steps before you implement the full-fledge methods to fix QuickBooks reboot loop issue. Note that you must have access to an admin account to fix this issue. In case you access the admin account, then perform the following steps: 

  1. Simply login to Windows using admin account 
  2. Further, head to start menu and choose the control panel. 
  3. Now, there click on programs. 
  4. Select turn Windows features on or off 
  5. There, you need to turn on .NET Framework 3.5
  6. And furthermore, reboot the system. 

The .NET framework is now required for QuickBooks installer to install any new updates. Note that, the installation process will fail, if it is disabled. The installed will complete the installation, in case it isn’t already done when you logged in. 

Also Read: How to Fix QuickBooks Install Diagnostic Tool – Fix Microsoft .NET Framework, MSXML, and C++ Issues?

Solutions to fix QuickBooks Requires that you reboot loop error 

You can implement a bunch of steps to fix QuickBooks keeps asking to reboot issue. Let us understand each of the solutions one by one: 

Solution 1: Use company file from a different location 

In case you are repeatedly experiencing the same issue, then try using the company file from a different location. You need to perform the following steps to use a company file from a different location: 

  1. Initially, you need to click on Windows + E tabs. 
  2. This will lead you to Windows Explorer. 
  3. You need to look for the file with .QBW file extension. 
  4. When you search for a file location on a given network server, make sure to do it where the data file is present. 
  5. Now, right-click on the file and select copy. 
  6. The next step is to find C: drive and create a new folder. 
  7. Assign the name to the folder as QBTEST. 
QBTest folder in QuickBooks
  1. Open the particular folder and paste the company file in it. 
  2. Open the QuickBooks holding ctrl tab. 
  3. Now, open the company file you copied and check if you still face the same issue. 

Solution 2: Create a new Windows admin user 

If the first solution didn’t work, try creating a new Windows admin user. This involves the use of the following steps: 

  1. To begin with, open the Control panel. 
Control panel - QuickBooks Requires That You Reboot Loop
  1. Now, double-click on the user account and click on manage user. 
  2. The next step is to click on the add tab. 
Create new admin user
  1. After it is complete, enter the name along with the admin domain and hit the ok tab. 
  2. If you are using Windows 10, then choose admin. 
Run QuickBooks as admin
  1. Also, press the finish tab and it will lead you to the user accounts dialog box. 
  2. The last step is to click on the ok tab. 

Also Read: How to Fix Script Error When Accessing QuickBooks Desktop?

Solution 3: Repair QuickBooks desktop installation 

Your QuickBooks desktop installation can be something causing the error. If your QuickBooks installation is damaged or corrupted. If that is the case, then try repairing the installation using the below steps: 

  1. Start the process by pressing ctrl + alt + del
  2. Once done with that, select task manager. 
  3. And then, press the process tab. 
  4. You now have to right-click on any of QuickBooks processes. 
  5. Later on, click on end processes. 
  6. You will now receive a confirmation notification to ask if you really want to end the process. Click on yes and try to perform the same task again. Check if the issue still exists or not and proceed further. 

Solution 4: Edit permissions related to temporary folders 

  1. Here, you need to press the Windows key 
  2. After that, add %temp% in the search box. 
Run temp command - QuickBooks Requires That You Reboot Loop
  1. Right-click the Windows temp folder after it has been opened and choose properties. 
  2. Furthermore, press the security tab on the properties screen and also click on the edit tab. 
  3. Go for the Windows username. 
  4. You now need to choose the checkbox for full control in the Allow column. 
Allow full control
  1. Click on ok tab. 
  2. And furthermore, install QuickBooks again to check if the issue continues. 

Solution 5: Run QuickBooks in selective startup mode 

To ascertain that no other software is causing an issue and hindering the process, you need to use selective startup mode. The steps involved in here are: 

  1. Initially, you need to press Windows + R to open the run command. 
  2. Once done with that, enter MSConfig when the window opens up on the screen. 
Type msconfig in Run box - QuickBooks Requires That You Reboot Loop
  1. You now have to enter the ok tab to show the system configuration screen. 
  2. Followed by pressing the selective startup mode in the provided General tab. 
Selective startup mode
  1. The next step is to choose load system services. 
  2. And then, move to the services tab and click on Hide all Microsoft services. 
  3. You now have to choose disable all option. 
  4. And further uncheck the particular hide all Microsoft services checkbox. 
Hide all Microsoft Service - QuickBooks Requires That You Reboot Loop
  1. Ascertain that the Windows installer checkbox option is marked from the provided list of services. 
  2. If it is not marked, make sure to put a checkmark in the particular checkbox. 
  3. You are then required to click on the ok tab. 
  4. Once done with that press the restart tab on the system configuration screen. 
  5. Now try to install QuickBooks again. After installing QuickBooks successfully, make sure you head back to the normal startup to avoid any sort of issues further. 
  6. The process of shifting to normal mode is easy and can be performed using the steps below:
    • At first, press the Windows + R tab to use the run command 
    • After that, add MSConfig and click on the ok tab. 
    • You now have to select normal startup in the general tab 
    • Also, click on the ok tab. 
    • The last step is to choose the restart option in the system configuration screen. 
Normal startup

Solution 6: Use Quick Fix My Program feature in QuickBooks tool hub to fix force reboot issue 

  1. You need to first close QuickBooks. 
  2. Furthermore, get the updated QuickBooks tool hub version. 
  3. Once done with that, you need to save the particular file to an easy-to-access location. 
  4. Followed by, opening the file downloaded by double-clicking on it. 
  5. You now have to perform the steps to install and then agree to the conditions and terms. 
  6. After the installation is over, you need to click on the icon available on the Windows desktop to open tool hub. 
  7. When the tool hub opens, you need to choose program problems tab. 
  8. Also, go for the Quick Fix My Program option. 
Quick fix my program
  1. And you need to begin with QuickBooks and then open the data file. 
  2. The last step is to reboot the system and check if the error persists. 

Solution 7: Use QuickBooks Install Diagnostic tool 

  1. Here you simply need to open the QuickBooks Tool hub. 
  2. Once done with that, you will have to navigate to the Installation Issues tab. 
  3. Furthermore, choose QuickBooks install diagnostic tool
QuickBooks install diagnostic tool
  1. And also run the tool and let it perform the scan. 
  2. After spotting the issue, the tool will perform the necessary steps to fix it.
  3. This might take some time. 
  4. Thus, you need to reboot the system to save changes. 
  5. The last step is to check if the issue continues to trouble you or not. 

Solution 8: Turn on .NET framework 

To perform these steps, you need to access an admin account. Here is what you need to do:

  1. Begin with logging in to Windows using an admin account. 
  2. After that, head to the start menu. 
  3. You now have to choose the control panel. 
  4. Click on programs. 
  5. The next step is to turn Windows features on or off 
  6. And in the next step, turn on .NET framework 3.5 
.Net framework 3.5 enabled - QuickBooks Requires That You Reboot Loop
  1. At the end of the process, you need to reboot the system. 

QuickBooks installer usually needs .NET framework to install any new updates. If that is disabled, then the process of installation is bound to fail. The installer will now successfully install the software, which was previously showing an error. 

You might find this helpful: How to Check QuickBooks Product Version and Release?


Now that you know what the QuickBooks Reboot loop error is and what measures can be taken to permanently eliminate it, it is time to implement these steps to fix the issue successfully. However, if you fail to do so, even after performing the set of steps discussed above, then in that scenario, give us a call at  +1-844-499-6700, and we will provide you with immediate support and guidance. 

Other Related Articles:

How to undo a reconciliation in QuickBooks online?

How to make a Journal Entry in QuickBooks Desktop?

How To Fix QuickBooks Online Login Problems On Google Chrome?

How to Download and Install Trial Version of QuickBooks Desktop (30-days trial)

Buy QuickBooks Today!

contact our male customer

Buy the all-new QuickBooks today!

Connect With QuickBooks Experts

Dial our toll-free number


This contact form is available only for logged in users.

This will close in 0 seconds

Looking for QuickBooks Help?

This will close in 0 seconds